Suitable for producing automobile explosion-proof film, car clothing film, optical grade release film, etc. Applicable substrate: PET, etc.<br> The oven is of high purification, class 100 design, explosion-proof structure, and chrome-plated steel precision guide roller structure;<br> Coating adopts various coating methods such as micro-gravure roller coating, comma roller coating, slit extrusion coating, closed cavity mesh coating, etc.;<br> High-precision aluminum idler roller, with an offset weight of less than 3g and flexible rotation, suitable for the production of optical grade substrates;<br> Unwinding is a double-station flipping type, flying knife or chopper type cutting and splicing, the air-inflating shaft or air-inflating chuck supports the material roll, and the roll can be changed automatically at high speed without stopping the machine;<br> The winding adopts double-station flipping type, zero-speed splicing structure, and an electric cloth storage machine, so the winding core has no wrinkles.

Solar cell backsheet is also called solar cell backsheet film, photovoltaic backsheet, photovoltaic backsheet film, and solar backsheet. <br> It is widely used in solar cell (photovoltaic) components. It is located on the back of the solar panel. It protects the solar cell components from water vapor erosion in outdoor environments, blocks oxygen and prevents internal oxidation of the components. It has reliable insulation, water resistance, and aging resistance. High and low temperature resistance, corrosion resistance. It can reflect sunlight and improve component conversion efficiency; it has high infrared reflectivity and can reduce component temperature. <br> Classification of photovoltaic backsheet<br> 1. Glue-coated composite backsheet film<br> The fluorine film or EVA film is compounded on both sides of the PET polyester film to form a three-layer structure. <br> 2. Coating back sheet film<br> The PET polyester film is coated with fluororesin on both sides and dried to solidify into a film. <br> 3. There are also a few manufacturers that use the cross-linking reaction method to react with cross-linking agents on both sides of PET to produce composite films or EVA films.

Scope of use of PET protective film: suitable for all types of screen protection, protection of computer keyboards during the production process, and protection with low static electricity requirements on the surface. LCD, LCM screen surface protection and anti-seismic protection, applied to the surface protection of electronic screens, instrument surfaces, automobile instruments, casings, etc., optical sheets, optical resin plates, etc. <br> This coating equipment uses micro-concave MG (or direct scraping COMMA or squeeze Slot-die) to coat the adhesive (pressure-sensitive adhesive PSA or silicone Silica gel) on the surface of the PET film. After hot air drying, UV curing, and then composite protection Film or direct winding mechanical equipment;

Suitable for coating PVDC medical packaging materials on rigid PVC. <br> Coating equipment: WS-TB-10<br> Curing method: thermal curing<br> Maximum mechanical speed: 150m/min<br> Coating method: mesh type, slit extrusion type<br> Base material: rigid PVC (0.15~0.4mm)<br> This coating equipment is a mechanical equipment that coats PVDC aqueous solution on the surface of the hard PVC film with a mesh (or extrusion slot-die), dries with IR and hot air, and then directly winds up or winds up the composite aluminized film;